Tools For Textiles
The Hoover Press-N-Snap tool is one of those "must have" tools. Outstanding features- Quick-snap interchangeable dies,
no alignment problems, 3 1/2" throat, high strength, low weight, aluminum alloy, additional dies available, for grommets and
other fasteners. Replacement parts are also available. Tool, Press-N-Snap, complete kit includes dies for Snap fasteners
10128 Button, 10224 Socket, 10379 Stud, and 10412 Eyelet. Tool will also set #1 brass grommets.
Press-N-Snap Tool / #275400 Kit Special $179.95
Tool, Press-N-Snap, complete kit includes dies for Durable Dot fasteners
10128 Button, 10224 Socket, 10379 Stud, and 10412 Eyelet
Plus die for No. 1 grommet with plain washer
Snap Fastener Components
10128 Durable Button / 50 ea
10224 Durable Socket / 50 ea
10393 Screw Stud / 50 ea
Use the Press-N-Snap Tool #275400 (above) to install these snap fasteners
Kit / Snap Fastener Components / 50 quantity each Special $65.00
Dye Cutter for Twist Lock Fastener Cutting dye used to easily punch the exact required holes to set the 78403 eyelet
component of the twist lock fastener. To be used on a flat, rubber cutting pad or soft wood surface. Note: This tool is not required
to set the twist lock fasteners. A sharp razor knife may also be used to carefully cut the required holes for the twist lock fastener.
Twist Lock Fastener Cutting Dye tool #216050 Special $136.00
Twist Lock Fastener Components
78323 Turn Button Stud / 50 ea
78505 Washer / 50 ea
78403 Eyelet / 50 ea
Use the Twist Lock Fastener Cutting Dye Tool #216050 to quickly punch the holes for these twist lock fasteners. (not required)
A sharp razor knife may be used to manually cut the holes for the twistlock fastener.
Kit / Twist Lock Fastener components / 50 quantity each Special $120.00
Pressure Sensitive (adhesive backed) Velcro "hook" side only.
This velcro componenet is used to replace the hook velcro which sticks to the side of the RV only.
Pressure Sensitive (adhesive backed) Velcro (hook side only), industrial grade, high adhesion ability is specially suited for outdoor use. This adhesive backed
hook Velcro must be installed on a smooth, flat, clean surface on your RV. (Caution: Extreme heat during the summer months may loosen the adhesive
backing, causing it to sag or shift slightly. Small, flat head screws with flat washers placed through the hook velcro into the sub surface (if possible) will help
minimize this problem. The sticky back hook velcro may also need to be replaced occasionally due to weathering.) NOTICE: This is the HOOK side of the Velcro only.
The LOOP side of the velcro will not adhere to the vinyl fabric permanently. The LOOP side of the velcro must be sewn onto the vinyl fabric.
Pressure Sensitive (adhesive backed) Velcro Hook side only, 2" wide, black Special $1.95 per foot, (25 ft minimum)
PREPAID USPS priority mail shipping to US Continental locations for on-line orders
Copyright © 2016, Idaho Canvas Products, Inc. All Rights Reserved