RV Skirting / Standard Heavy Duty
       


Stay warmer this winter and reduce your heat costs.  Idaho Canvas Products offers an affordable and easy way to skirt your RV, camper, or travel trailer.   

Our standard, heavy duty RV Skirting panel kits are ideal for year round use in harsh temperature climates where your RV may be exposed to hard, cold winds and where extreme, sub zero, temperature freezing is a potential problem.   At Idaho Canvas Products we manufacture generic, heavy-duty, custom RV skirting panel kits from our heaviest 18 oz, polyester reinforced vinyl which is extremely durable and strong.  The 18oz vinyl fabric is tear resistant and the edges will not fray. Offered in popular Black, White, Gray, and Tan colors only.   (See vinyl fabric specifications and colors) The individual, custom vinyl panels can easily be cut and folded around steps, hitches, and pipes.

ADVANTAGE OF IDAHO CANVAS RV SKIRTING:

Meets requirements of RV parks
Heavy weight fabric resists wind wear
Can easily be installed by one or two people
Improves the appearance of any RV or Travel Trailer
Helps stabilize your RV and minimize wind rocking
Helps winterize your RV
Easy to clean and store

Idaho Canvas Products provides generic, finished panels and fasteners only.  We do not fabricate, nor stock skirting for specific RV models.  You must determine the correct panels sizes you need by accurately measuring your RV.  You must determine the best location for mounting the fasteners onto your RV.  Each RV or Travel Trailer is different and the installation of the skirting may require additional hardware which you can purchase locally.  

After your RV skirting panels are installed, strips of vinyl can be glued to the vinyl panels to cover any gaps between panels using the HH-66 Vinyl Fabric Joint / Patch Kit.  We also offer (glue in) Vinyl Zipper Splices in several different lengths, which allow you to un-zip separate panels, if needed.  We also offer (glue in) Vinyl Hook and Loop (velcro) Splices in several different lengths, which allow you to connect and separate panels, if needed. Skirting Panel Height choices available are:  24", 30", 36", 42", 48", 54", 60", 66", 72".  Depending on height, Skirting Panel Length choices available are: 10', 15', 20', 25', 30', 35'.   Stock fabric color choices available are: White, Black, Gray, and Tan.  


Three choices of top attachments are available:  Twist locks, snaps, or hook and loop (Velcro).  
The selected fasteners are included with each RV skirt panel ordered.

Twist Lock Fastener
 
The male components of the twist lock fastener (shown above right) are included with your order and must be installed on the trailer, in a solid location, with small screws or rivets. (Screws or rivets are not included).  The female components of the twist lock fastener come pre-installed in the cover at approximately every 20". You must determine the the proper type of screw or rivet to use for your application. The male component of the twist lock fastener sticks out 3/4".  Make sure you have clearance for the twist lock fasteners when skirting your slideout.  Do not pre-drill all the fastener holes in your RV. Attach one twistlock fastener at a time as you work your way around your RV.  All twist lock fasteners have corrosion resistant silver color nickel finish and rust-resistant brass springs. Mounting screws are not provided for the twistlock fasteners.  Please check with your local hardware store professional can help you determine the best type and size of mounting screw to use for your application.  

To purchase additional twistlock fastener parts and setting tools click here.

Snap Fastener

               
The male component of the snap fastener (shown above right) are included with your order and must be installed in the trailer, in a solid location. The female components of the snap fastener come pre-installed in the cover at approximately every 20". The male component of the snap fastener sticks out 1/4".  Make sure you have clearance for the snap fastener when skirting your slideout.    Do not pre-drill all the fastener holes in your RV.  Attach one snap fastener at a time as you work your way around your RV.  All snap fasteners have corrosion resistant silver color nickel finish and rust-resistant brass clips.  

To purchase additional snap fastener parts and setting tools click here.

Hook and Loop Fastener (Velcro)

The adhesive backed, HOOK component of the velcro fastener is provided with each panel you order and must be installed on the trailer, in a smooth, flat, clean location.  The LOOP component of the velcro fastener comes pre-sewn on the individual skirting panel.  It is recommended that the outside temperature be 40 degrees F, or warmer, when applying the sticky back component onto your RV.   (Caution: Extreme heat during the summer months may loosen the adhesive backing on the hook side, causing it to sag or shift on the RV.  Small screws with washers placed through the velcro into the RV will help minimize this problem. Twistlock fasteners can also be manually installed through the velcro for a more secure attachment.   The adhesive backed hook side of velcro on your RV may also need to be replaced occasionally due to weathering.)   

To purchase additional pressure sensitive, adhesive backed Velcro, hook side only, click here.

Bottom Pocket Hem for weights and stake loops
Each finished skirt panel has a 5" pocket hem sewn along the entire bottom for weight inserts.  (The 5" pocket hem is not included in the overall height of the panel). The 5" pocket hem is designed to fold back under the RV and lay flat on the ground.  Rope stake loops are also placed into each skirting panel every 5' along the bottom allowing you to securely stake the panels into the ground. (Stakes are not included)


HELPFUL THINGS TO KNOW ABOUT RV SKIRTING:

The height measured over the RV wheel axles should always be a consistent height to the ground, no matter where your RV is parked.
The rubber beading trim found on most RVs is usually mounted at a consistent height on all four sides and is a good, solid mounting point to consider for skirting.
If using twist lock fasteners, you must determine the proper type of screw or rivet to use for your application.  Your local hardware store professional can help you.
If using velcro fasteners, you must apply the sticky back velcro to a clean, smooth, flat surface.
Longer panels can be wrapped around corners to skirt both the sides and ends of your RV.  
Use longer panel lengths when possible to minimize openings and reduce splicing.
Slideout skirts are generally mounted higher on the RV and may require a separate skirting panel.
If the slideout space tolerance is minimal, fasteners are not always required to be mounted on the short ends of a slideout.
Because of the rounded shape on the front nose of many RVs it is recommended to use twist lock fasteners on the nose skirting for more secure attachment.
To minimize wrinkling, it is recommended that you attach one fastener at a time as you work your way around your RV.  Do not pre-drill all fastener holes.
Always cut the vinyl skirting fabric from around heat source areas like the furnace or hot water tank exhaust.
Do not drive or pull your RV with the skirting panels attached.  Before traveling, remove the skirting panels from your RV and store them properly.

HOW TO ORDER:

(STEP 1) Measure your RV to determine the correct height and length of the individual panels you will need to fully skirt your RV

Standard Heavy Duty RV Skirting
Panel Height choices available are:  24", 30", 36", 42", 48", 54", 60", 66", 72".  Depending on height, Panel Length choices available are: 10', 15', 20', 25', 30', 35'.
Stock fabric color choices available are: White, Black, Gray, and Tan.  Custom colors are also available upon request.

   
Determine the best location for mounting the fasteners onto your RV.  Measure the height from this point to the ground on all lower, slideout, and nose skirting.  
These are your individual panel heights.

    
Determine the panels lengths required to fully skirt you RV on all four sides.  Measure depth and length for separate slideout panels, if required.  
These are your individual panel lengths.


PREPAID UPS ground shipping included to USA Continental locations for on-line orders

Please currently allow 2-3 weeks for production.


(STEP 2) Select your appropriate skirting panel height and length, your fabric color, and choice of fasteners, then order below.

24 inch high - Standard Heavy Duty RV Skirting panels
24" high x 10' long   SPECIAL  $  85.00
24" high x 15' long   SPECIAL  $120.00
24" high x 20' long   SPECIAL  $157.00
24" high x 25' long   SPECIAL  $199.00
24" high x 30' long   SPECIAL  $242.00
24" high x 35' long   SPECIAL  $284.00


30 inch high - Standard Heavy Duty RV Skirting panels
30" high x 10' long   SPECIAL  $  92.00
30" high x 15' long   SPECIAL  $126.00
30" high x 20' long   SPECIAL  $162.00
30" high x 25' long   SPECIAL  $206.00
30" high x 30' long   SPECIAL  $246.00
30" high x 35' long   SPECIAL  $289.00


36 inch high - Standard Heavy Duty RV Skirting panels
36" high x 10' long   SPECIAL  $  97.00
36" high x 15' long   SPECIAL  $132.00
36" high x 20' long   SPECIAL  $170.00
36" high x 25' long   SPECIAL  $212.00
36" high x 30' long   SPECIAL  $252.00
36" high x 35' long   SPECIAL  $294.00


42 inch high - Standard Heavy Duty RV Skirting panels
42" high x 10' long   SPECIAL  $  102.00
42" high x 15' long   SPECIAL  $140.00
42" high x 20' long   SPECIAL  $179.00
42" high x 25' long   SPECIAL  $224.00
42" high x 30' long   SPECIAL  $269.00
42" high x 35' long   SPECIAL  $315.00


48 inch high - Standard Heavy Duty RV Skirting panels
48" high x 10' long   SPECIAL  $  107.00
48" high x 15' long   SPECIAL  $149.00
48" high x 20' long   SPECIAL  $189.00
48" high x 25' long   SPECIAL  $239.00
48" high x 30' long   SPECIAL  $286.00
48" high x 35' long   SPECIAL  $334.00


54 inch high - Standard Heavy Duty RV Skirting panels
54" high x 10' long   SPECIAL  $  117.00
54" high x 15' long   SPECIAL  $162.00
54" high x 20' long   SPECIAL  $212.00
54" high x 25' long   SPECIAL  $265.00


60 inch high - Standard Heavy Duty RV Skirting panels
60" high x 10' long   SPECIAL  $129.00
60" high x 15' long   SPECIAL  $181.00
60" high x 20' long   SPECIAL  $235.00
60" high x 25' long   SPECIAL  $293.00


66 inch high - Standard Heavy Duty RV Skirting panels
66" high x 10' long   SPECIAL  $140.00
66" high x 15' long   SPECIAL  $199.00
66" high x 20' long   SPECIAL  $259.00
66" high x 25' long   SPECIAL  $324.00


72 inch high - Standard Heavy Duty RV Skirting panels
72" high x 10' long   SPECIAL  $157.00
72" high x 15' long   SPECIAL  $218.00
72" high x 20' long   SPECIAL  $283.00
72" high x 25' long   SPECIAL  $353.00


(STEP 3) Determine if you need any additional accessory items to cover gaps between panels, separate panels, or to create access, then order below.

 

HH-66 VINYL FABRIC Joint / Patch Kit

Strips of vinyl can be glued to panels to permanently join RV skirting panels together or to aid in customizing your skirting
around steps, hitches, or storage areas.  Minor holes and tears can also easily be repaired in your Vinyl RV Skirting fabric
with HH-66 Vinyl Fabric Joint / Patch Kit.  This patch kits comes with one 32 oz. can of HH-66 Vinyl Adhesive and 15 square
feet of 18oz vinyl fabric in your choice of black, white, gray, or tan.

Using the HH66 vinyl joint/patch kit,  Zipper Splices and Hook and Loop Splices can also be glued to individual panels so the panels can be
separated if desired.

HH-66 vinyl cement is easily and quickly applied.  This cement provides a fast drying and exceptionally strong
bond to all types of vinyl coated fabrics. It can also be used for sealing or waterproofing seams.
Select the color of vinyl fabric you need and order below.  

HH-66 Vinyl Joint / Patch Kit          SPECIAL $45.00    
  



 

Vinyl Zipper Splice  / Glue in

Two separate panels can be joined together with the VINYL ZIPPER SPLICE so that they can be separated (un-zipped) if desired. A zipper
splice is also great for adding a zippered door access into 5th wheel nose skirts and storage compartments.  Each Vinyl Zipper Splice comes
pre-sewn with a #10 size, heavy duty, separating zipper.  Zipper splices are glued into the panel at the desired location and require the purchase
of the HH-66 Vinyl Fabric Joint / Patch Kit to install.

12" long Zipper Splice   SPECIAL  $17.00
18" long Zipper Splice   SPECIAL  $19.00
24" long Zipper Splice   SPECIAL  $21.00
30" long Zipper Splice   SPECIAL  $25.00
36" long Zipper Splice   SPECIAL  $29.00
42" long Zipper Splice   SPECIAL  $33.00
48" long Zipper Splice   SPECIAL  $38.00
54" long Zipper Splice   SPECIAL  $43.00
60" long Zipper Splice   SPECIAL  $48.00
66" long Zipper Splice   SPECIAL  $53.00
72" long Zipper Splice   SPECIAL  $58.00



 
Vinyl Hook and Loop (Velcro) Splice  / Glue in

Two separate panels can be joined together with the VINYL HOOK and LOOP SPLICE so that they can be separated (pulled apart) if desired.   
Each Vinyl Hook and Loop Splice comes pre-sewn with 2" wide hook and loop fastener.  Hook and Loop splices are glued into the panel at the
desired location and require the purchase of the HH-66 Vinyl Fabric Joint / Patch Kit to install.

12" long Hook & Loop Splice   SPECIAL  $16.00
18" long Hook & Loop Splice   SPECIAL  $18.00
24" long Hook & Loop Splice   SPECIAL  $20.00
30" long Hook  Loop Splice   SPECIAL  $23.00
36" long Hook & Loop Splice   SPECIAL  $26.00
42" long Hook & Loop Splice  SPECIAL  $30.00
48" long Hook & Loop Splice   SPECIAL  $34.00
54" long Hook & Loop Splice   SPECIAL  $39.00
60" long Hook & Loop Splice   SPECIAL  $44.00
66" long Hook & Loop Splice   SPECIAL  $49.00
72" long Hook & Loop Splice   SPECIAL  $55.00


RV SKIRTING - PHOTO GALLERY

      

  

  

  

5th wheel nose skirt installed                                          Cut out around 5th wheel hitch                                     Cut out around door
     

Zipper splice each side of storage compartment       Storage compartment panel zipper access               Cut out around heater exhaust
    

2x3 wood weight inside bottom pocket                        Two panels overlap on single twistlock stud             Two panels overlap on single twistlock stud
   

 

 

 




You may also consider custom fabricated slide out caps

   

Copyright © 2016, Idaho Canvas Products, Inc. All Rights Reserved